Sahand kenitex

Sahand Kintex Applying Order:

Due to the high adhesion strength and rapid drying of imported oily acrylics resins before mixing oily acrylic kenitex with water, perform all steps, such as masking, substrate preparation, etc., since after mixing the acrylic kenitex with water, you need to spray at least 20 minutes (approx. 20 minutes) on the facade, as the oily acrylic resin kenitex begins to dry, and the exit from the nozzle is hardly done.

Each kerosene or 20 kilos bucket needs some 6 to 10 liters of water (depending on the weather conditions).

Avoid adding more water because the material becomes two-phase, causing the bullet to form or the acrylic kinetics sediment. Before executing kenitex It is recommended that all interior and exterior surfaces be cleaned by means of air compressor or by water and decontaminate any pollutants.

It is advisable to for old cement and stucco to use a special primer before applying oily acrylic resin to avoid yellow spots.

oily kenitex is durable due to the properties of adhesion and flexibility, which won’t chip, flake or peel It also has resistance to water penetration, abrasion, fungal and microbial contamination and ignition.

Keep container bins at a temperature between 3 and 40 degrees Celsius and away from direct sunlight.

The amount of primer consumed and its implementation:

For a surface of 200 square meter, 20 kg of primer (special glue) with 20 liters of water and Spray the sealer on the interior and exterior faces.

Technical Specifications of Jahan Acrylic kenitex

No unpleasant odor and water consumption instead of paint thinner

Free of lead and metal

Easy washing

Eco-friendly

Ease of operation, excellent resistance to abrasion and dirt

Excellent coverage

Applicable on cement, wood, iron, arduvaz, plaster, concrete and …

This product is in nyloned and sealed.