acrylic opque paint
Jahan opaque acrylic paint Opaque product code: JHCO-110 Jahan opaque acrylic paint is used for fast staining of interior and exterior surfaces of the building (plaster, cement, brick, arduaz, cement, wood, etc.). This high quality color has a very good resistance to the weather and sun, also penetration of water and alkaline materials, so is […]
Jahan opaque acrylic paint
Opaque product code: JHCO-110
Jahan opaque acrylic paint is used for fast staining of interior and exterior surfaces of the building (plaster, cement, brick, arduaz, cement, wood, etc.). This high quality color has a very good resistance to the weather and sun, also penetration of water and alkaline materials, so is suggested for outside of the building, especially the view of buildings. Rinse ability, excellent covering ability, high drying speed, ease of use, water dilution, odorless odor, resistance to sunlight and ultraviolet, and eco-friendly are advantageous of the paint. This product is available for different applications in and opaque glossy types.
| Theoretical coverage | opaque 10 to 11 square meters per liter
Glossy 9 – 11 square meters per liter The actual amount depends on the substrate surface, the thickness of the coating, the device used and the environmental conditions. |
| Surface drying time | Maximum 1 hour |
| Time to apply the next layer | minimum 3 hours |
| Glossy | |
| Flash point |
| Surface preparation | Before painting, prepare the surface by removing chip, flake or peel. Then, if necessary, apply plaster or putty, smooth the surface of the substrate and then polish by sandpaper. The final surface before painting should be clean and free of any contamination, dust or grease.
For cement levels, use a Waterjet method to clean the surface and make sure the surface is dry completely before painting. |
| Method of Use | ۱٫ Mix the Jahan opaque acrylic paint with the appropriate amount of water and apply it to the surface. The amount of water-color mixing depends on the temperature of the environment, the surface area and the coloring tool, but in normal coloring, the amount of water mixed with paint, in percentage by weight, with a brush 20% -30%, with a roller 15 %- 25% and with the pistol of 25% – 30% (it is recommended to apply the spray method)
۲٫ To increase the longevity and longer durability of acrylic paint, as well as to create a high gloss with a prettier appearance, it is recommended to apply a layer of acrylic water based lacquer on acrylic paint The use of these lacquer is defined by the degree of gloss. Painting is recommended at a temperature above 10 ° C, a surface temperature of 3 ° C above the dew point and a humidity of less than 80%. |
| Wash the tools | After work, wash hands, coloring tools or dusted materials on the ground with warm water and soap. To prevent rust, rinse tools and equipment with a White Spray solvent and dry immediately. |
| Safety notes and storage conditions | Store the contents of the container in a dry, cool and far from direct sunlight and with adequate ventilation. Prevent paint to freeze. After use, close the lid of the container. The best time to use in proper storage conditions up to 30 months after the production date. If in contact with the eyes (after washing with high amounts of water) or if swallowed, go to medical centers. |
