Technical Characteristics of Acrylic Oily kenitex for Interior and Exterior Buildings

Ingredients: Acrylic resin, Titanium oxide, Synthetic fibers in different grades, Perlite, Drinking water, Bentonite, Alkaline oxide, Calcium bicarbonate in various mesh, Talc powder, Mica powder, Formalin, Ammonia, Anti-freeze, Antifungal, Anti Mold, antifreeze and so on. . .

The acrylic kenitex rubber is a very beautiful cover and protector for indoor and outdoor use. Resistance and strength of acrylic kenitex against atmosphere over the past several years is the reasons that acrylic kenitex has been introduced as an appropriate cover for the building in most countries of the world. The acrylic oily kenitex due to the especial chemical composition is water-proof and is resistant to atmospheric. Also, acrylic kenitex, due to their light weight and specific gravity, are loaded less on the building and is applicable on cement, wood, iron, arduvaz, plaster, street tables, styrofoam structures, concrete, etc. can be easily applied in different colors, and after 8 hours to 15 hours after spray drying, final strength is achieved after 1 month.

It is noteworthy that each kilogram of kenitex covers a super type of 1.5 square meter, privileged 1.30 square meter.

Specifications of different types of oily acrylic kenitex for interior and exterior facades of buildings: Water Base

oily acrylic kenitex are available in three polyox (0.4 soft), fine (regular 0.5), (medium 0.6) granules.

Breathe of acrylic kenite for interior and exterior facades of buildings

While the walls protect against water penetration, it allows water vapor in the walls to leave.

Oily acrylic kenitex properties for interior and exterior facades of buildings

Acrylic oily kenitex fills the holes and cracks and conceal the defects of the buildings and have complete water repellency. The product is Water Base and water is used as a diluent solvent. Acrylic kenitex lose their water after use and become dry, robust film. Oily kenitex has all the specifications of oily kenitex, which are offered as a unique and superior product. The superiority of acrylic kenitex versus oily aclyric is use of water as a solvent and no use of oil solvents, which eliminates the requirement to use it in closed environments. The types of acrylic zinc oxide are produced in white, and when there is no limit on the color spectrum, it is enough to mix the plastic color with the oily acrylic kenitex.

Guaranteed oily aclyric kenitex for interior and exterior facades of buildings

oily kenitex is durable due to the properties of adhesion and flexibility, which won’t get shell and tin. It also has resistance to water penetration, abrasion, fungal contamination, microbial contamination, flammability, and guarantees for 7-15 years and 100% washable.

Guaranteed oily aclyric kenitex for interior and exterior facades of buildings

Due to the high adhesion strength and rapid drying of oily aclyrics resins before mixing oily acrylic kenitex with water, perform all steps, such as masking, subsoil, etc., since after mixing the acrylic kenitex with water, Spray at least 20 minutes (approx. 20 minutes) on the facade, as the oily acrylic resin of the kenitex kerosene begins to dry, and the exit from the nozzle is hardly done. Please do not expose kerosene to direct sunlight, because the solvents in the containers evaporate rapidly and the contents become so tight and unusable.

Kenitex can be applied on interior and exterior facades, any hole on the desired surface should be eliminated by a special sealant, it is also necessary to clean up the contamination from the surface before applying oily kenitex on the internal and external facades.

It is advisable to for old cement and stucco to use a special primer (mix of glue, c.225 and water) before applying oily acrylic resin to avoid yellowish and yellow spots.

• Store kerosene and oil buckets containing oily aclyric kenitex at a temperature above 0C.
• If, for any reason, the containers of oily aclyric kenitex were stored at 0 ° C, resulting in freezing, kept in a warm place until fully de-frozen and ready to be re-used.

Primer consumption and how it is performed:

For a surface of 300 square meter, mix 20kg of acacia glue with 30 liters of mixed drinking water and spray it on the interior and exterior sides.

Examples of packing containers for oily acrylic kenitex for interior and exterior facades of buildings

Red kerosene or white bucket with red door is the super grade and 15 years’ warranty.

Yellow kerosene or white bucket with a yellow door is the privileged grade and 10 years’ warranty.

** All kerosene and buckets are 20kg and have lead sealing of the jahan kenitex chemical company. **

Characteristics of oily kenitex for interior and exterior of buildings