Sadaf semi plastic coating

product introduction :

Sadaf semi plastic coating is based on vinyl acetate resin with rapid drying ability and ease of execution. This color, after evaporation of water, creates an integrated and robust film.

Application:

It is used as the decorative coating interior of the buildings. It can also be applied to plaster, cement, wood, brick and other surfaces.

Chemical and physical properties:

How to prepare the surface:

The surface should be free of any dust, moisture, oil.

Sadaf semi plastic coating

How to apply:

Spray, brush and rollers

Applicable conditions:

Environmental temperature: Minimum ° C 5 – Maximum ° C 45

Surface temperature: At least 3 ° C above dew point

Humidity: Maximum 80%

Sadaf semi plastic coating

These coatings are semi-plastic in the market. Due to the low quality of the semi-plastic coating, this coating isn’t washable, and more often used in a remote location, which is hard to access, such as ceilings, balconies, because when you open a soft cloth These coating absorb water in a soft tissue and, due to the non-water-absorbance of these types of coatings, the materials are loose and absorbed in the tissue. Other characteristics of this type of coating are that it does not blow out the light, and also the dries coating is brighter than the initial coating.

Familiarity with the principles of working with semi-plastic coating is one of the characteristics of a fine painter. Though the use of this type of coating is simple and easier than the oil paint, the tips should also be followed.

Do not use semi-plastic paint to paint metal or wood objects. The semi-plastic paint is usually used on walls, ceilings, and so on.

The use of high-quality semi-plastic paint is recommended.

The less water is, the more difficult it is to use, the longer it last and its coverage is better. So by adding enough water, you can increase the quality of your work.

When using shots, be careful to work left and right so that the shot line fades away.

Notice the direction of your work be toward the room door. In the wider rooms, move the shot vertically.

It is better to use rollers rather than shots.

If you paint on any other objects, be sure to clear it. The semi-plastic color will dry out early and it will be more difficult to clean in the future.

After first-hand painting, wait for at least 3 hours to complete drying.

Try to change the amount of light or darkness in the second and third try. This action helps you find work direction.

When using a semi-plastic paint, unlike oil paint, it is recommended that the keys and the gas pipe not be painted.

Remember to not use oily paint to paint the room’s ceiling.

The advantages of the Sadaf semi-plastic coating:

This type of paint is mixed with water and does not require oil solvents.

These colors do not smell like oily colors.

These colors are soon dried and it is useful in the time of early completion of the work and its cost is low.

This color is opaque and eliminates any fault in plasstering from the surface of the ceiling and the wall to a certain extent.

The disadvantages of semi plastic coating:

It does not spill water because it absorbs water.

Soon becomes pus (about 2 years)

Cannot be washed.

Cannot be used on iron bars, windows and doors.

Package type:

۲٫۵ Gallon containers

Maintenance method:

Keep it in a cool, dry environment with a maximum temperature of 35 ° C and with a suitable ventilation system.

Best use date:

۱۸ months after the date of production under suitable conditions

Safety tips:

When working with the product, it is recommended to use appropriate ventilation in the environment.

Sadaf semi plastic coating:

Color attribute:

This paint is based on water-soluble polyvinyl acetate copolymer resin for plaster, brick, cement and concrete surfaces for interior of buildings. One of the properties of this product is rapid drying, high adhesion, color stability, moisture resistance and abrasion resistance. This color does not cause any environmental pollution due to its water-solvable.

The mother of plastic color is based on polyvinyl acetate resins (P.V.A). This mother colors can be added in various percentages to P.V.A.-based plastic paints, and can be obtained in the desired color.

Since the color of the pigment used in the mother color is very high, the color of the mother is very good, so the color of the mother can be optimized by the minimum mother color. Also, the mother color is used directly to paint the interior surfaces of the building (plaster, cement, brick, arduaz, wallpapers and wood). The plastic mother color has a good drying time and is resistant to sunlight and ultraviolet radiation. It is also widely used for wall and textile applications.

Features:

Superior covering

Ease of use and ability to dilute with water

Eco-friendly

Good resistance to abrasion

No unpleasant smell